With more than 40 years of experience in the field, Sport System is the perfect solution for the customer looking at a “turnkey” solution. Providing products technical specifications at the tender stage, through to the design of customised solutions, onto to the supply and installation of sports equipment and functional furniture. Sport System offer support for
the customer throughout and up to the after-sales service of testing and periodic maintenance!
Sport System’s sales team can quickly develop a technical and commercial proposal to completely equip and furnish a multifunctional building, in all its rooms and spaces. Starting from the preliminary analysis of drawings and plans, in the design phase, or conducting onsite inspections conducted during construction. With the support of its technical department Sport System guarantees the ability to design for any solution that allows the end users the best use of the entire facility including all the amenities. The consultancy in the design phase is then followed by full assistance in the
supply phase and in the subsequent post-sales phase.
Could be installed in the main play area of an indoor multisport hall:
As well for spaces and rooms complementary of the main play area, Sport System can offer:
Wall mounted side folding basketball backstops TREVI model. Reinforced varnished steel construction 325 cm projection made of high section tubes with special frame to be fixed to the wall (can be customized depending on particular wall construction). Movement takes place on self lubrificated bushing and special ball bearings. Automatic searcher of play and rest positions. Equipped with safety tempered glass backboards, thickness 12 mm with protective film, mounted onto varnished steel frame equipped with polyurethane protective pad. Varnished steel reclining rings and cotton nets. FIBA approved for 2nd level competitions.
Roof mounted up folding motorized basketball backstops Top. Varnished steel structure anchored through 2 high section beams to the roof (frame to be manufactured accordingly to the type of exhisting roof structure). Mobile structure supporting backboard made of varnished tubular steel studied in order to let the backboard be as closed as possible to roof once the structure is closing up. Motorized movement with accessories. Equipped with safety tempered glass backboards, thickness 12 mm with protective film, mounted onto varnished steel frame equipped with polyurethane protective pad. Varnished steel reclining rings and cotton nets. Average vertical projection mt 7/8 and horizontal projection cm 320. FIBA approved for 2nd level competitions.
Hydroplay ACE portable basketball backstops mobile on wheels, projection 325 cm, oleodynamic electric device for height adjustment and independent control of transport wheels, glass backboards with pad, reclining rings with net; FIBA approved for 1st level competitions
Judges’ table made of tubular varnished steel structure. Worktop, front and sides covered by chipboard panels. Complete with 4 caster wheels with brake. Dimensions 300x70x76 cm.
Protective screen to be placed behind judges’ table and players’ bench. Made of varnished tubular steel structure supporting the shockproof transperent 3 mm polycarbonate panel. Each module is mobile on rubberized pivoting wheels to be easily attached to the main structure. Price at mt
Judges chair made of coloured polypropylene seat with backrest mounted onto chromed steel frame, hookable and stackable.
Pair of five-a-side soccer (futsal) goals with internal dimensions 300×200 cm. Portable model made of varnished reinforced aluminium profile, round section 80 mm, with reinforced angle joints. Ground frame and net support frame made of varnished steel. Equipped with safety net holders with twin hooks made of wear-resisting plastic. Including ground fixing accessories.
Pair of handball goals with internal dimensions 300×200 cm. Portable model made of varnished (white-black, white-red, white-blue) reinforced aluminium profile, square section 80×80 mm, with reinforced angle joints. Ground frame and net support frame made of varnished steel. Equipped with safety net holders with twin hooks made of wear-resisting plastic. Including ground fixing accessories.
Varnished aluminium volleyball system (2 posts) with ground sockets. Main posts made of aluminium, oval profile 120×100 mm, with inner reinforcement and sliding system for the height regulation of the net with blocking knob. Including net tensioner device installed in one of the 2 posts and ground fixing accessories. Including ground sockets and lids made of aluminium.
Multisport electronic scoreboard FS130N, dimensions 200×180 cm, cable transmission, . Visualizing game time, team scores, period, bonus, timeout, possession/service/turn, team fouls or sets won, details of last foul. Horn. Programmable team names. FIBA – Level 1 and Level 2
Pair statistics panels FS-412D visualizing 12 players’ number (programmable), personal fouls by digit, dimensions of each panel 80×240 cm
Equipment locker made from varnished sheet steel with 4 shelves and lockable compartment for valuables inside, dimensions 100x45x200 cm. Key type closure.
Desk with 3 drawers. Varnished sheet steel structure with rubber floor pads and chipboard worktop. Key locking drawers. Dimensions 130x76x78 cm.
Padded fireproof armchair with chromed steel structure with armrest supports, coloured polypropylene seat padded.
Padded fireproof chair with chromed steel structure, coloured polypropylene seat padded.
Medical examination couch. Varnished and chromed steel structure, reclining headrest and lying area padded and covered with washable synthetic leather. Total dimensions of surface 190×60 cm.
Varnished sheet steel wardrobe at 2 doors. Unique structure with dimensions 75x35x180 cm. Reinforced doors with breath holes, space for name card and key locking system. Inside equipped with shelf, hooks bar, lateral hooks, umbrella holder and water container.
Locker room bench 1 metre. Complete with backrest, clothes hanger hooks and roof. Tubular varnished steel structure diameter 40 mm, with shoe shelf underneath. Seating area, backrest, clothes hanger and roof made of varnished wooden planks, section 100×21 mm. Complete with 3 clothes hanger hooks and rubber floor pads, dimensions 100x40x185 cm.
Locker room table. Varnished steel structure with rubber feet. Dimensions 80x80x76 cm.
Wall protection made of high density polyethylene covered with pvc, thickness 22 mm, height 200 cm, fireproof and EN913 tested
Column protection made of high density polyethylene covered with pvc, thickness 22 mm, height 200 cm, fireproof and EN913 tested
Boundary protective pad for play court made of high density foam fully covered with fireproof pvc, triangular section with base 200×50 cm and height 75 cm
Play-courts “acoustic” dividing curtain made of synthetic fireproof PVC, double layer, closing to the ceiling by electric motor
Play-courts combined dividing curtain made of synthetic fireproof PVC, double layer, for 220 cm on bottom part and 10×10 cm net on upper side, closing to the ceiling by electric motor
Fixed grandstand for indoor use with varnished steel structure, seating area made of wood or coloured polypropylene seats, walkways and stairways accordingly to current rules; can be customized on demand. Price at mt/step
Telescopic grandstand for indoor use manually or electrically operating, varnished steel structure, seating area made of wood or coloured polypropylene seats, walkways, stairways and hand rails accordingly to current rules, entirely customizable on dimensions fittings and finishing
Dividing barrier for indoor sport hall made in varnished steel, indicative dimensions of each element 200×100 cm, available in sockets solution or with ground fixing plates; can be customized
The selected article has been added to your information request list.
Add more items Send inquiry